Sunday, 13 August 2017

Silicon Mould Making and Resin Casting


So how is everyone?
I've been planning a new class for a retreat I have coming up soon and I am planning on using some cast resin pieces as part of the kit.
This was all very good in principle but having never attempted casting anything before it left me with a little bit of a challenge.

This weekend I finally got round to having my first attempt so I thought I would share with you what I did and how it turned out.
I started a few weeks ago by doing an internet search for silicon mould making to see what products were out there for me to use. After reading a different company websites I decided on an Irish company MB Fiberglass  and gave them a call,  I explained what I wanted to achieve and that I had never tried anything like this, they were extremely helpful in explaining the different products, cure times etc and what should be done to get the required results.

I decided on getting their 1.1kg Polycraft GP-3481F Silicone kit  £20ish for making my mould 
and their 1kg Polycraft SG 2000 Fast Cure PU Resin System £15ish for making the resin embelishments.
When handling and using these products it's recommended you use a pair of rubber gloves and some eye protection.  
The Silicon mould making kit comes as a two bottle kit, a 1kg bottle of what I assume to be a liquid silicone  and a 100g bottle of liquid that will cause the silicone to set to a flexible mould. (i am sure there is more to it than that, the science isn't important ;) )


I wanted to cast a 3d metal star I have and its about 5 inches across.
you need to create a space to pour the silicon. I have used an old biscuit tin as it was just about the right size, If anything it's a little bigger than it needed to be. You could use a flat surface with your craft sheet as the base and modeling clay to build a wall. I was told a 10mm thickness of silicon around what you are casting is enough to make the mould viable anything beyond that is technically a waste of product. Depending on what you are casting though it's just easier to find a suitable container and pour.


The star I have is made from thin sheet metal so is hollow on the reverse. to stop the silicon from seeping under in the mould making process I decided to place a sheet of cling film over the star and to line the whole tin including the sides. This created a sealed barrier between the star and the silicon, it would also create extra texture on the stars surface.
I could also have set the edges of the star into some modeling clay and cleaned the edges with a craft knife to get a smooth clean edge to the star. 


I picked up a couple of cheep plastic measuring jugs large enough to contain the 1.1kg load of product.
I should have done some maths to figure out exactly how much product I needed but as I only had a max of the 1.1kg bottles I thought I would need all of it if not a little more.
Mix bot parts together in the measuring jug making sure its mixed together properly. The 1kg bottle is the silicon and is very thick and white in colour. The 100g bottle contains the setting agent and Is red in colour. Imagine mixing food colouring into dough. Once its a uniform colour you are ready to pour the liquid into the container. Do this slowly as you don't want to trap any air bubbles in the mould. Leave it to sit for 6-8 hours or over night.
If you don't need to use the complete 1kg tub you will have to do a little maths to figure out how much of each product is needed.


Giving a gentle pull on the clingfilm the silicon mould released nice and easy and came out of the tin without any trouble, Once flipped round I could place the mould back in the tin which will help with storage and keeping it safe, It has also added a little extra stability to the base as I only just had enough product for the mould, the point of the star is a little thin (not the 10mm recommended thickness). I have since picked up a couple of 6 inch round cake tins that will be perfect for my next attempt.
Using the cling film was great for adding extra texture but in a couple of places it has slightly rounded my edges, Next time I will make sure to pour slowly and work the clingfilm down around the edge of the star.


Using the Polycraft SG 2000 Resin I worked out I needed about 100ml of liquid to fill the star shape.
The resin kit is also a 2 part system and is a 1:1 ratio.  So I would need 50ml of one bottle mixed with 50ml of the second bottle.
The product works by creating a chemical reaction that causes the two liquids to set, at this point once you mix you want to pour fairly quickly as it starts to set pretty fast, so have everything ready to go before you start the mixing process.
Carefully pour the liquid into your mould and leave to set, the stars set in about an hour and were ready to be popped out of the mould.


You can just about see towards the base of the star where I lost the definition of my edges but also the extra texture created by the clingfilm.
I think I will be able to get about 10 stars from the resin kit I bought which means each 5 inch star is costing £1.50 which I think is pretty good value and the silicon mould will last for 100's of pours if looked after.

I also found the best way to clean up the plastic measuring jugs was to leave the dregs of the product to dry completely. The silicon just peels away in a very satisfying manner ;)
With the resin it might be an idea to leave something like a wooden lollipop stick poking out so you have something to grab, it still pulls away from the jug fairly easily and cleanly. 

All in all I was very impressed with how easy it was to make the mould and create the resin stars.
I made the mould at lunch time and by the time I went to bed I had three stars made.
Lots learnt and I am no longer wary about giving it another go and with a few tweeks I will get the results I am after all ready in time for the new workshop.

As always a huge thank you for stopping by. Hopefully the post wasn't to wordy for you and sorry the pics were not a little more exciting ;) xx






Thursday, 13 July 2017

Alice in Wonderland Fat Book class


Just a quick little post to share with you my new class sample for an Alice in Wonderland themed mixed media Fat book.
I know things have been quiet here in blog land but I promise to be back with an update post of some recent trips and classes.

I have just finished the new Alice book and this will be a new class ill be rolling out in the Autumn.
class details will be at the bottom of the page.
This is a new kit I have put together with Tando-Creative and the class will cover several different techniques including image transfer and painting and working on acrylic,mdf and grey board using the Decoart Media Line.

If you would like any info or to book me for a class please feel free to contact me via Facebook or email. x















30 sep/1 oct     lets Be Creative      south east uk near Guildford

21/22 oct    Beautiful Things        Brentwood Essex

A full list of dates, classes and projects can be found by clicking the classes tab at the top of the page. xx

Simon Says Stamp are having a Distress It Challenge on their blog this week.  Ive gone for a more colourfull but still distressed style for my Alice book x.


Friday, 9 June 2017

7 Gypsies Guest Designer



I am over the moon about today's little post, I have been asked to be a guest designer for the
  7 Gypsies  blog this month.
I was asked to play with the brilliant new Architextures range and have created a couple of vintage and shabby wall hangings.
If you head over to the 7 Gypsies blog you can find more pics and a little write up of how and what I did. 
Hope to see you over there x

Monday, 15 May 2017

Andy Skinner Design Team Grungy Chic Wine Crate


A little tease piece today as I share my first make as part of the New Andy Skinner Design Team.
We will be focussing on Andy's range of products, Stamps, Stencils etc as well as the Decoart range of paints and mediums.
To see the full project with a little info on what I did to achieve the grungy finish just follow the link HERE.
Keep heading back as well so you can see all the new inspiration from the new DT.
xxx.


Tuesday, 11 April 2017

Decoart Graffiti Tutorial Happy Easter


Morning all, thanks for stopping by, It's been a busy few weeks here and I am just back from Andy Skinner's Ministry Of Mixology retreat where Kate Crane and France Papillon taught a weekend of fantastic classes and I was there to lend a hand and teach one o the make and takes on the Saturday eve.
Such a fun weekend catching up with so many crafty friends and so much creativity under one roof always leads to a good weekend away.

Today though I am sharing a Graffiti style step by step tutorial on the Decoart Media Blog, I have used lots of Decoart Media products and the new Chalky Finish White Cream Wax along with various stencils. The main focus stencils are from a new Stencil book I picked up recently after seeing a FaceBook friend post about it, Details can be found on the Decoart post.
I hope to see some of you over there. For those of you that don't know about the media blog, you will be introduced to some amazing mixed media artists sharing their tutorial posts using the Decoart Products.


As always a huge thank you for stopping by.
xxx.
If you would like to follow me on FaceBook you can find me HERE.

Simon Says Stamp Monday challenge are having a Hip Hop challenge ;) x Now I know my entry is a little tongue in cheek but I have tried to keep it festive with my Jesus Graffiti and the links between hip hop culture and the Graffiti street scene lol x.



Tuesday, 21 March 2017

Chalk Paint ATC's


Thanks for stopping by, I hope all is well where you are?
With mothers day and my sisters birthday coming up this weekend I needed something to give my mum and sister and as I am not a big card maker I decided to be a little different and make some Atc's and use them instead.
I started with some mdf blanks from Tando Creative and used Decoart's Chalky Finish Paints for the background.
I used three of the new colours in the range and used the same three colours for each Atc just varied the amount of each colour as I blended them together allowing each colour to partly dry before adding the next colour, this allowed for a softer blending and different colour tones to show through.
I used the colours, Colonial, Victorian and Bestow.


I have used the Tim Holtz Pear stamp and stamped using Stazon ink. the edges have been distressed with the ink and the back has been painted black so I can write a birthday message to my sister with a white posca pen. The Atc has been finished with a satin varnish, this really helps bring out the colours and makes things pop a little more.


This stamp is from Viva Las Vegas Stamps and will be a mothers day card from my 6 month old Niece to her mum with a little message on the back.


This stamp is also from Viva Las Vegas Stamps and this Atc will be making its way to my mum for mothers day.

Thanks for stopping by. xx






Friday, 17 March 2017

Decoart / Stampendous Blog Hop Skull Coaster


Items Used:
Decoart Media Fluids
Andy Skinner Stampendous stamps: Skuldoggery, Toxic

Thanks for stopping by on the last day of the Stampendous/Decoart blog hop that has been running all week.
Here are the list of people playing along today. 

Friday

Pam Bray

Jamie Martin

Louise Healy

Asia King

Janelle Stollfus

Lea Fritts

Alison Heikkila

Katy Leitch

Mark Gould

DecoArt Blog


Today I have a 4x4 inch canvas board coaster painted with Decoart Media Fluids and one of Andy Skinners new Stamps from Stampendous.

I started by mixing a pale shade of green using the Media Fluids  and the Media Tinting Base and applied a base coat to the canvas board.
Once dry I stamped the skull with Black Stazon ink and started painting the skull using the fluids acrylics. I watered down the Transparent Yellow Oxide for the main skull, A little Titanium white for the teeth and a little Pyrrole Red for the nose.
I created a mask for the skull by stamping the image on some thin copy paper and cutting it out. I used Andy's Scratch stamp from the toxic set and stamped using the fluid acrylics to add some colour contrast and interest to the back ground.
I finished by stamping the word Fear also from the Skuldoggery set across the top of the skull and using a Posca pen added some highlights to the letters.
The edges were distressed using some Stazon ink applied with some foam.

Thanks as always and If you have some time we would love to see you joining in on the hop and seeing what the other DT members have created.
xx

Wednesday, 15 March 2017

Industrial Grunge Clock Decoart/Stampendous Blog Hop


Items Used:
Andy Skinner Stampendous Stamps. Curiosity, Steampunk
Stampendous Stamp Vintage Note

This week Stampendous and Decoart have come together for a week long blog hop celebrating the Andy Skinner stamps new and old and the Decoart Media Line.
Here is a list of the people participating today.

Stampendous Blog

Jamie Martin

Louise Healy

Mark Gould

Ursula Wollenberg

DecoArt Blog

I am lucky enough to be on both design teams and have taken this opportunity to share a new class I have put together with a new faux Pitted Tin technique and a little rust thrown in as well.



A couple of close up pics to show the textures created.
This is a grey board kit from Tando-Creative and measures 12 inches x

I cant wait to teach this class and I am so excited that the first place I will be teaching it is on my return trip to California this May 5th/6th when I visit It's All About The Scrapbook in Dixon CA.

If you have some time it would be great to see you stopping by the the other hoppers pages and leaving some love, you never know, you might be selected as one of the winners.
Head over to the Stampendous or Decoart blog for details of the generous prize pack. xx






Wednesday, 22 February 2017

CHSI Trade Show and some New Class Dates


I am enjoying a lazyish day today after a busy weekend at the CHSI trade show held at the Birmingham NEC this past Sunday, Monday and Tuesday where I had a stand promoting the classes I run.
It was great fun catching up with so many crafty friends and meeting so many more new faces, Lots of fantastic contacts made and lots to think about over the coming months.
I am just sharing a couple of cheesy pics of me and my booth ;)

I have also added a couple more dates to the Classes page on the top of the blog and hopefully there will be more added to the list in the coming weeks, keep popping back or friend me on FaceBook for more up to date info.



I so need to work on the resting B face ;-)

Wednesday, 15 February 2017

Decoart Mixed Media Blog Tutorial Post - Painting and working with Acrylic


Today It's  my turn to share a little tutorial post over on the Decoart Media Blog and I have gone for a Vintage Circus style tag using one of the Acrylic Media Boards from Tando Creative and stamps from Carabelle Studio.
If you follow the Decoart Link it will take you straight to the tutorial post xx.
Hope to see you there. x



Simon Says Stamp are having a 'Use your favorite tool' challenge this week. My fave tool has to e the heat gun, I am an impatient crafter and always turn to my heat gun to help things along when I can, I have also used it for one if it's more traditional uses on my tag for some heat embossing.




Wednesday, 1 February 2017

Classes, March 4th and March 5th.


I hope everyone is doing well despite what may be going on in the world at the mo?

Just a quick update post today.

I will be at Crafty Bunch in Telford on Sunday March 5th teaching my double sided shabby chic clock using Decoart Chalky Finish Paints and the Kit from Tando Creative.
One side will be a faux chalk bard finish and the other side we will go through a distressing technique ideal for embossed surfaces.

On Saturday March 4th I will be at Daisy Jewels and Crafts in Coventry teaching my New pitted tin class using one of their kits and the Decoart Media line, we will also be using Stampendous and Carabelle Studio stamps.







Thank you for stopping by. xx.





Friday, 13 January 2017

New Class Project Pitted Tin



Well, my blog is like waiting for a bus at the mo, nothing for ages and then three posts pop up all together ;)
If you follow me on FaceBook you may have seen me share a little tease and test piece for a new technique I have been playing around with. It's a pitted tin faux finish and the sample for my March 4th class at Daisy Jewels and Crafts in Coventry.
I am also in Telford on March 5th at Crafty Bunch Class project to be confirmed x.



Plenty of messy fun with the Decoart Media line and lots of Andy Skinner Stampendous Stamps and Carabelle Studio stamps to finish of an Industrial Chic style Grunge container ideal for all your lose pens, pencils and crafting smalls xx


Thanks as always for stopping by. And hopefully I will see some of you on the road in 2017.


I would like to enter my Shabby/Grungy box into a couple of challenges.x

Frilly and Funkie are having a Vintage or Shabby Chic challenge at the mo.

Altered Eclectics are having an Anything Goes Altered art/Mixed Media challenge running. 



Thursday, 12 January 2017

Decoart DT 2017


Another lighting fast post today.
I am over the moon to be part of the Decoart Media DT for 2017. It's an amazing team to be part of an I am so pleased to part of the team again for 2017.
You can check out the full team by clicking the link below.




Wednesday, 11 January 2017

Stampendous Andy Skinner New Stamps


Happy New Year all.
Ok, now I know we are nearly two weeks into Jan but it's been a slow start mojo wise and I am just getting back into the swing of things after an amazing crafty  2016.

Today is just a quick post as I have just got y hands on the new Andy Skinner Stamps, they should be in the stores very soon ;)
For my first play I grabbed a 4 inch canvas board and gave it a base coat of a green I mixed up using the Decoart Fluid Acrylics and the Media Tinting Base.

Anyone that knows me will know of my love of skulls and all things slightly (totally) horrible so to my delight when I got hold of some of the new Andy Skinner stamps ;)
The skull was stamped with Stazon ink and the skull was painted using watered down, Transparent Yellow Oxide and Quinacridone Gold, a little Titanium White for the Teeth and some Pyrrole Red for the nose.
I made a mask using the skull stamp to protect the image and the back ground was stamped with Andy's Scratch BG stamp and some Decoart Media Fluids.
The word Fear was stamped across the skull and the edges were distressed with some Stazon Ink.

Stay tuned, I will be back soon with some new Pics for a new workshop with a new Pitted Tin finish. xx